Key takeaways
- Maturity is measured from the end of the financial year in which the account opens.
- The model assumes the full annual deposit arrives by 5 April each year.
- A current-quarter rate held constant for decades is a scenario, not a promise.
The PPF calculator projects a new Public Provident Fund account with one April deposit every financial year. It shows estimated deposits, interest, maturity date and annual balances, with optional five-year extensions that continue contributions. Use the tool to inspect assumptions and contribution timing, then compare the model with the account rules. Results are estimates, not tax advice; read the disclaimer.
Understand the opening-year convention
The most consequential timing detail is the maturity definition. Paragraph 11 of the Public Provident Fund Scheme 2019 measures fifteen years from the end of the financial year in which the account opened. Opening in FY 2026-27 therefore means initial maturity on 31 March 2042. The calculator includes the opening financial year and fifteen complete subsequent financial years, producing sixteen annual deposits in its initial scenario. NSI scheme text, checked 16 November 2026.
That convention explains why a familiar “15-year calculator” might display a different result. A calculator accepting exactly fifteen contributions may be modelling a different cash-flow interval. Before comparing amounts, compare the number of contributions, first payment date and maturity date. A difference caused by one extra deposit is not an interest-rate disagreement.
This version assumes a new account funded in April, before or on the fifth, in every included financial year. It does not ask for an existing balance, account-opening day, withdrawals or a varied monthly schedule. If your first deposit happens later in the opening year, the initial year’s full interest assumption will overstate that year’s modeled interest.
Steps that match the calculator
- Enter Yearly April deposit as a whole rupee amount in multiples of ₹50, between ₹500 and ₹1,50,000. Consider the relevant combined limits before choosing a contribution.
- Review Annual interest rate (%). The starting value is 7.1%, verified for October–December 2026. You can edit it to explore a constant-rate scenario.
- Enter Opening financial year starts in. For FY 2026-27 enter
2026, rather than2027or the text of the full year label. - Enter Five-year extensions with deposits. Use zero for initial maturity or one for an extra five-year block. The tool offers up to six blocks as a planning limit.
- Read Estimated PPF maturity, Maturity date, Financial years with deposits, Total deposits and Estimated interest.
- Open Show calculation schedule to inspect the annual deposit, interest and closing balance. Change one input at a time and record each scenario’s assumptions.
Interest calculation and the current rate
The model applies this annual recurrence:
Interest = (opening balance + April deposit) × annual rate / 100
Closing balance = opening balance + deposit + interest
The deposit earns a full year’s interest because of the assumed early-April timing. Scheme paragraph 7 uses the lowest balance between the close of the fifth day and month end for monthly interest eligibility and credits interest annually. Do not generalise the annual recurrence to late deposits or withdrawals without adjusting the eligible balance for each month.
The DEA memorandum dated 30 September 2026 retains the previous quarter’s small-savings rates for October–December 2026. Read together with NSI’s rate table, that supports the 7.1% PPF starting value. The calculator holds your entered rate constant through the entire projection; actual future notifications can change. DEA memorandum enclosed in the official postal order, NSI rate table, checked 16 November 2026.
Two worked examples
Example 1: initial maturity with a constant-rate assumption. Enter Yearly April deposit 150000, Annual interest rate 7.1, Opening financial year 2026 and extensions 0. There are sixteen deposits totaling ₹24,00,000. The first year’s interest is ₹1,50,000 × 0.071 = ₹10,650, so that closing balance is ₹1,60,650.
The second year’s interest is (₹1,60,650 + ₹1,50,000) × 0.071 = ₹22,056.15, taking the second closing balance to ₹3,32,706.15. Continuing the same recurrence for sixteen financial years gives estimated maturity ₹45,17,702.07, including ₹21,17,702.07 interest, on 31 March 2042. These are projections before intermediate account-ledger rounding.
Example 2: one contribution extension. Keep the same deposit, rate and opening year, then set extensions to 1. Five more deposit years make twenty-one contributions totaling ₹31,50,000. Apply the same recurrence to the initial maturity balance for five further years. Estimated maturity becomes ₹72,91,676.63, with ₹41,41,676.63 estimated interest, on 31 March 2047.
Both examples were verified with the pure PPF module in Node. The difference includes ₹7,50,000 of extra contributions as well as additional assumed growth. Do not call the entire difference “extra interest.” As a zero-rate cross-check, sixteen deposits of ₹500 produce ₹8,000, while twenty-one produce ₹10,500.
Scheme limits and extension conditions
Paragraph 4 specifies the annual minimum and maximum and multiples of ₹50. The relevant own and minor account deposits share the specified combined ceiling. The input validates one annual modeled amount; it cannot see contributions in other accounts or determine your eligibility to open or operate an account.
Paragraph 12 permits extensions with contributions in five-year blocks, subject to the required election through Form 4 within one year of maturity. Choosing an extension in a calculator does not submit that election. This model excludes extensions without deposits, discontinued-account treatment, revival, loans, partial withdrawals and early closure. Six extension blocks is a software scenario ceiling, not a statement that the scheme imposes that lifetime maximum.
Common mistakes
Do not assume a late-year deposit earns the same interest as an early-April deposit. Do not treat the current-quarter percentage as a guaranteed lifelong rate. Do not compare a sixteen-deposit result with a fifteen-deposit result without aligning cash flows. Finally, keep tax deduction eligibility separate from account contributions: the calculator projects the account and does not determine your final income tax benefit.
Questions and answers
Why does the calculator include sixteen deposit years?
It includes the opening financial year and fifteen complete years after that year’s end, matching its stated maturity convention.
Can I enter monthly deposits?
This version accepts one annual April amount. Monthly or later deposits require a monthly eligible-balance calculation instead.
Is 7.1% guaranteed until maturity?
No. It is the verified current-quarter starting rate. Future official notifications may change the interest credited.
Does an extension keep contributions going?
Yes, this model continues the same annual amount through each selected five-year block. It does not model extensions without deposits.
Is this suitable for an existing account balance?
No. It starts from zero and assumes a new account. Use the actual ledger and remaining maturity period for an existing account analysis.
Sources
- NSI Public Provident Fund Scheme 2019, paragraphs 4, 7, 11 and 12, checked 16 November 2026.
- NSI official small savings rate table, checked 16 November 2026.
- DEA 30 September 2026 memorandum, official postal enclosure, checked 16 November 2026.
Free tools for this
Calculators
PPF Calculator
Estimate PPF maturity with yearly April deposits, an editable interest rate, the opening financial year and optional five-year extensions, with a schedule.
Calculators
Recurring Deposit Calculator
Estimate recurring deposit maturity and interest from monthly instalments, tenure and a yearly rate, with an explicit quarterly compounding convention.
Calculators
Compound Interest Calculator
Calculate compound or simple interest with yearly, quarterly or monthly compounding and optional monthly additions.