Maths

Percentage Calculations: Formulas, Examples and Fixes

Choose the right percentage formula for marks, discounts and changes, with worked examples explaining base values, reverse calculations and percentage points.

By the Criza Labs team · Updated · 6 min read

Key takeaways

  • Identify the base number first; changing the denominator changes what a percentage means.
  • A percentage amount and the total after adding or subtracting it are different results.
  • Successive changes multiply, while percentage points measure the direct difference between two percentage values.

Percentage calculations express a part, comparison or change relative to a base of 100. Use them to convert marks into a percentage, check a discount or describe how much a value has risen or fallen; choosing the correct base is usually more important than the multiplication itself.

Before you start

Write the question as a sentence and label the quantities. For marks, identify marks obtained and marks available. For a change, identify the starting and ending values. For a discount, decide whether you need the discount amount or the final price, since those are different questions even when they share the same inputs.

Use consistent units. If a total is ₹2 lakh and the part is ₹50,000, enter 200000 and 50000, rather than mixing 2 with 50000. The calculation is unit-independent, so it works globally with currencies, distances and counts, provided both values use the same unit.

Inputs stay in your browser; CrizaTools does not upload the numbers for calculation. You do not need to enter a name, salary slip or marksheet. Use the relevant totals alone, and keep a written record of the inputs when the result will be quoted in an application, report or budget.

Step by step with CrizaTools

  1. Open the percentage calculator. Four calculation cards are visible together, and each updates independently as you type. There is no mode switch or Calculate button.
  2. For What is X% of Y?, enter the rate in Percent and the base in Of number. This gives the percentage amount, such as the money saved, rather than the remaining balance.
  3. For X is what percent of Y?, enter the part in Number and the whole in Of total. This is the appropriate card for marks obtained out of available marks.
  4. For Percentage increase or decrease, enter the original value in From and the new value in To. A positive percentage indicates an increase; a negative one indicates a decrease for ordinary positive starting values.
  5. For Add or subtract a percentage, enter the starting value in Number and a signed rate in Percent (+ or −). Use -12 to subtract 12%, or 12 to add it. Enter the rate as a number without typing the percent symbol.
  6. Read the explanation under the result and compare it with your original sentence. Outputs show up to four decimal places, so use the unrounded calculation when carrying intermediate values into another calculation.

Two worked examples

Example 1: exam marks and percentage points. A student scores 468 out of 600. In X is what percent of Y?, enter Number 468 and Of total 600. The exact result is:

percentage = marks obtained / available marks × 100
           = 468 / 600 × 100
           = 78%

Reverse-check with What is X% of Y?: enter Percent 78 and Of number 600. The result is 600 × 78/100 = 468, matching the original score. This confirms the arithmetic for that chosen set of marks, without deciding which subjects a particular institution wants included.

Suppose the earlier score was 72%. The new score is 6 percentage points higher because 78 − 72 = 6. Its relative increase is 6/72 × 100 = 8.3333% to four decimal places. Enter From 72 and To 78 in the change card to reproduce that relative increase. Calling it merely a “6% increase” would mix up two different measurements.

Example 2: two discounts on a ₹2,500 item. A hypothetical offer takes 12% off a ₹2,500 price, then another 5% off the reduced price. In Add or subtract a percentage, enter Number 2500 and Percent -12. The exact first result is 2500 × 0.88 = ₹2,200.

Now enter Number 2200 and Percent -5. The exact final price is 2200 × 0.95 = ₹2,090. The total saving is 2500 − 2090 = ₹410, and the effective discount is 410/2500 × 100 = 16.4%. The overall multiplier is 0.88 × 0.95 = 0.836; adding the two rates would incorrectly predict a 17% discount.

To recover the original from the final price, divide by the multiplier: 2090/0.836 = ₹2,500. Adding 16.4% to ₹2,090 would instead give ₹2,432.76 because the base has changed. Use the starting price when checking the discount percentage and the final price only when asking a question explicitly based on that final amount.

Limits and what to watch for

Zero is a valid base when finding a percentage amount: 25% of zero is zero. It is not a usable denominator for a part-of-total percentage or for a conventional percentage change from zero. CrizaTools displays a dash for a non-finite result; describe the absolute change instead when the percentage base is zero.

For negative starting values, this tool’s change calculation divides by the absolute value of the starting number: (new − old)/abs(old) × 100. Its explanatory line is simpler, so check the convention yourself when working with negative balances or values crossing zero. A change from −100 to −50 produces +50% under this convention, but the business meaning still needs an explanation.

Percentage results need not be between zero and 100. A part greater than the stated whole gives more than 100%, and a negative rate can be meaningful in a change calculation. Check whether your chosen real-world interpretation allows those inputs rather than assuming the calculator should reject them.

Displayed figures are rounded to at most four decimal places. If a payable amount needs two decimal places, round at the final stage according to the receiving system’s instructions. This calculator supplies arithmetic only; it does not choose a tax rate, an institution’s marks policy or a scheme’s eligibility threshold.

Common mistakes

  • Reversing part and whole: put marks obtained in Number and maximum marks in Of total.
  • Reporting the discount amount as the price: subtract it from the base or use the signed-rate card directly.
  • Using the new value as the base for a rise: enter the original in From and the new value in To.
  • Adding consecutive discounts: multiply the remaining-price factors instead.
  • Calling percentage points a percentage increase: state which comparison you mean and show its denominator.
  • Rounding every intermediate step: keep full values until the final result to avoid accumulated error.

Questions and answers

How do I calculate percentage of marks?

Divide the marks obtained by the corresponding maximum marks and multiply by 100. Use X is what percent of Y?, keeping the numerator and denominator limited to the same subjects or assessment components.

How do I find the original price after a discount?

Divide the final price by 1 − discount rate/100. For multiple discounts, divide by the product of their remaining-price factors, provided there are no other price adjustments in the example.

What is the difference between percentage and percentage points?

Percentage points are the subtraction of two percentage values. A relative percentage change divides that difference by the starting percentage, so moving from 72% to 78% is six points but an 8.3333% relative increase.

Why does a 10% rise followed by a 10% fall lose money?

The fall applies to the increased base, not the original base. Starting at 1,000 gives 1000 × 1.10 × 0.90 = 990, an overall decrease of 1%.

Can I average percentages from different totals?

An ordinary average works only when equal weighting matches your question. For an overall marks percentage across assessments with different maxima, add the obtained marks and available marks separately, then divide the combined totals and multiply by 100.

Check the right base with the percentage calculator, or compare price reductions with the discount calculator.

Free tools for this

Calculators

Percentage Calculator

Four percentage calculators in one: X% of Y, what percent X is of Y, percentage increase or decrease, and adding or taking off a percentage.

Calculators

Discount Calculator

Find the sale price and how much you save, including offers like 40% + extra 10% off, with optional GST on top.

Calculators

Age Calculator

Find your exact age in years, months and days from your date of birth, on today or any date, plus total days, weeks and a countdown to your next birthday.

More guides

Free desktop app from Criza Labs

Bill every day? Get CrizaVoise free

GST invoices, thermal receipts, stock and payments in one offline app for Windows, Linux and macOS. No subscription, no sign-up, no ads, and your data stays on your computer.

  • 58 mm and 80 mm thermal printing
  • UPI QR on every invoice, WhatsApp sharing
  • Open source (Apache 2.0), English, Hindi, Gujarati and more
The CrizaVoise dashboard with quick bill and new invoice buttons, stock alerts and sample figures