PDF & image

How to Add PDF Page Numbers or a Text Watermark

Number PDF pages or apply a rotated text watermark. See two examples, choose position and opacity, and learn numbering totals, font and signature limits.

By the Criza Labs team · Updated · 5 min read

Key takeaways

  • Numbering follows file order; N always means the loaded PDF's page count.
  • Position follows the visible page crop and rotation, with oversized marks fitted.
  • A visual watermark does not redact text or prevent copying.

The PDF page numbers and watermark tool adds a visible overlay to every page of a PDF. Choose sequential numbers for a report or a text watermark for a draft, then save a new copy. All processing uses pdf-lib in your browser; the document is not uploaded to a conversion service.

Prepare the final page order first. Numbers follow the current file positions, so rearranging pages afterwards can leave an incorrect sequence printed on them. Use the PDF page editor before numbering when you need to rotate scans, move attachments or remove whole pages.

Before you start

Choose an unlocked PDF up to 200 MB and 5000 pages. A protected or damaged document may not open. If you are authorised to use it, save an unlocked copy in a PDF reader and retry. The tool does not ask for a password or provide an encryption bypass.

Decide which mode you need. Page numbers create one running number per page, starting from your chosen value. Text watermark repeats the same text on each page. The interface applies one mode per export. To combine the two, download the first export, load that copy again and apply the second mode.

Look at the margins in your source. Marks are drawn over existing content, so a footer or central diagram can overlap them. There is no visual preview in this tool. Position, size and opacity describe the intended overlay; checking the downloaded PDF is the step that confirms whether it works with the actual layout.

Step by step with CrizaTools

  1. Use Choose a PDF or drop it here and wait for the filename and page count.
  2. Choose Mode as Page numbers or Text watermark.
  3. Choose Position from the nine visible-page positions.
  4. In Page numbers mode, set Start number and Number format. Choose 1 for plain numbers or Page 1 of N for a label with a total.
  5. In Text watermark mode, enter Watermark text and set Watermark rotation from −180 to 180 degrees.
  6. Set Font size in points and Opacity as a percentage.
  7. Press Apply and save PDF, download the new file and inspect the first, last and any differently sized pages.

Changing the source or any setting clears the old download. Apply again after adjusting a value. Each export starts from the loaded source, so repeatedly pressing Apply with changed settings does not keep stacking marks. Loading an already exported copy does make its previous marks part of the next source.

Two worked examples

Example 1: numbering a three-page attachment. Choose Page numbers, Bottom centre, Start number 1, Number format Page 1 of N, Font size 12 and Opacity 100. The labels become Page 1 of 3, Page 2 of 3 and Page 3 of 3.

Now change Start number to 5. The labels become Page 5 of 3, Page 6 of 3 and Page 7 of 3 because N is the loaded file’s page count, not the ending number. If the attachment continues a larger report and that wording is confusing, choose plain numbers. The result then reads 5, 6 and 7 without implying a different total.

Example 2: a draft watermark. Choose Text watermark, enter DRAFT, select Centre and set Font size 72, Opacity 20 and Watermark rotation -30. The same rotated word is drawn over each page. The mark uses the visible page crop and accounts for existing page rotation.

Check a small appendix page as well as the normal report pages. If the rotated text would exceed the available page area, the tool reduces its size to fit within margins. The final visible size can therefore be smaller than 72 points on an unusually small page. Shortening the text or selecting a smaller size can make appearance more consistent across mixed page sizes.

Limits and overlay behaviour

Start number accepts whole numbers from 0 to 1,000,000. Font size accepts 6–144 points and opacity accepts 1–100 percent. Watermark text has a 200-character limit and uses standard Helvetica. Enter supported basic Latin text; emoji, line breaks and scripts outside the supported font range receive an error rather than a broken-looking export.

Position is calculated in the rotated visible crop area, then mapped back into PDF coordinates. That matters for a source with landscape rotation or a crop that does not begin at the underlying page origin. Long or rotated text is fitted to available bounds. These calculations still need a visual check against the document’s content.

The pdf-lib page API describes drawing text and page rotation, and the font API describes text measurements; checked 16 November 2026. This implementation uses those operations to add the overlay without rasterising every page.

A watermark is not redaction, encryption or copy protection. It does not remove the underlying words, and it does not establish access permissions. Editing a signed PDF can invalidate signature verification. Keep the original if authenticity, forms or interactive features matter, and treat the downloaded result as an edited copy that needs review.

Common mistakes

  • Numbering before deciding the final page order.
  • Expecting N to equal the highest running number when Start number exceeds one.
  • Placing an opaque centre watermark over important content.
  • Entering unsupported characters and expecting a bundled font to appear.
  • Assuming a requested font size cannot shrink on a small page.
  • Treating a visible label as protection against extracting underlying text.

Questions and answers

Can I skip the cover page?

This interface applies the selected mark to every page. It does not have a page-range or skip-cover option. Prepare a suitable source or use a dedicated document workflow when selective marking is required.

Can I choose a different font or colour?

This version uses standard Helvetica and a dark grey mark. The controls expose font size and opacity. There is no custom font upload or colour picker in this PDF tool.

Does rotation apply to page numbers?

The watermark mode exposes rotation for its text. Page numbers use an unrotated baseline relative to the visible page, while respecting the source page’s own display rotation.

How do I add both numbering and DRAFT?

Save and check one mode, then load its output as the next source and apply the other. Keep an unmarked original so you can rebuild the final copy if either layer needs a different setting.

Can I watermark a photograph instead?

Use photo watermark for image files. It supports a logo image, text, a position grid and tiling, whereas this tool places a text overlay onto PDF pages.

Free tools for this

PDF & image

PDF Page Numbers and Watermark

Add page numbers or a text watermark to PDF pages privately. Choose position, starting number, number format, font size, opacity and watermark rotation.

PDF & image

PDF Page Editor

Rotate, reorder and delete PDF pages in your browser. Drag page rows or use keyboard buttons, inspect page sizes and save an edited copy without uploads.

PDF & image

Photo Watermark

Watermark a batch of photos with text or a logo in your browser. Choose a position grid, opacity, size and tiling, then download JPG, PNG or WebP copies.

More guides

Free desktop app from Criza Labs

Bill every day? Get CrizaVoise free

GST invoices, thermal receipts, stock and payments in one offline app for Windows, Linux and macOS. No subscription, no sign-up, no ads, and your data stays on your computer.

  • 58 mm and 80 mm thermal printing
  • UPI QR on every invoice, WhatsApp sharing
  • Open source (Apache 2.0), English, Hindi, Gujarati and more
The CrizaVoise dashboard with quick bill and new invoice buttons, stock alerts and sample figures