Key takeaways
- Size is a percentage of photo width, with a height cap for tall marks.
- Tiling repeats the watermark and overrides the single-mark position grid.
- Save individual downloads and inspect the mark against each photo's content.
The photo watermark tool draws text or a raster logo onto a batch of photos in your browser. Choose one position or repeat the mark across the picture, adjust opacity and relative size, then export new image files. The source photos and logo stay on your device during processing.
Use this workflow for visible attribution or a review label. A watermark is part of the exported pixels, but it does not prevent copying or establish access control. Keep original photos separately so you can make another version later without repeatedly encoding an already watermarked copy.
Before you start
Decide whether text or a logo will work better at the intended viewing size. Text uses a browser sans-serif font, white fill and a black outline. A logo uses the pixels of the uploaded image. A transparent PNG is useful when you want the photo to show around the logo rather than inside an opaque rectangular background.
Prepare a batch with similar delivery requirements. The same settings apply to every selected photo, but the result depends on each photo’s dimensions and content. A bottom-right mark may sit over a dark background in one image and a bright face in another. Relative size makes the mark proportional, while visual inspection confirms whether that placement is appropriate.
If a destination needs exact photo dimensions, use image resize and crop first. The watermark tool automatically reduces very large sources to bounded working dimensions, but it does not have a custom width and height field. Read the dimensions beside every download before assuming the source pixels were all retained.
Step by step with CrizaTools
- Use Choose photos or drop them here to select the batch. Read the selected count and any skipped-file messages.
- Set Watermark type to Text or Logo image.
- Enter Watermark text, or use Choose a logo or drop it here and wait for the logo dimensions.
- Choose a button in the Position grid for a single watermark.
- Set Opacity from 1 to 100 percent and Size from 5 to 80 percent of photo width.
- Enable Tile watermark across photo if you want repeated marks. The position grid becomes disabled because tiling controls placement.
- Choose Output format and Quality, then press Watermark photos. Download each result and inspect it at its intended viewing size.
Changing a photo selection, logo or setting clears previous downloads. Regenerate after each change. A newly selected photo batch replaces the previous selection; it does not append indefinitely. Save the current outputs before choosing another batch if you want to keep both sets.
Two worked examples
Example 1: a corner logo on a landscape photo. Take a 1200 × 800 photo and a logo with a 2:1 width-to-height ratio. Select Logo image, Bottom right, Size 25 and Opacity 40. The requested mark width is 1200 × 0.25 = 300 pixels, making its height 150 pixels.
The margin is three percent of the shorter photo dimension: 800 × 0.03 = 24 pixels. The logo’s top-left is therefore x = 1200 − 300 − 24 = 876 and y = 800 − 150 − 24 = 626. The mark blends over that region at 40% opacity. Its original alpha pixels still influence the blend, so an already faint logo may need more opacity.
Example 2: a tall logo that needs fitting. Take the same 1200 × 800 photo and a logo whose width-to-height ratio is 1:4. At Size 50, the requested width would be 600 pixels and the corresponding height 2400 pixels. That is much taller than the photo.
The height cap is 80% of the photo height, or 640 pixels. The fitted mark is therefore 160 × 640 pixels. This preserves the logo’s proportions instead of stretching it. Enable tiling and the tool repeats fitted marks where they fit, with spacing and bounded repetition. Disable tiling to return to a single grid-selected placement.
Limits and export behaviour
Choose up to 20 photos, at most 50 MB per file and 500 MB combined. Supported raster inputs include JPG, PNG, WebP and browser-readable AVIF. A logo can be up to 10 MB. SVG is not accepted in this workflow. Convert an appropriate vector logo to a transparent raster copy first if needed.
Photo working dimensions are capped at 16 million pixels and an 8192-pixel long edge. Logos scale to at most 4 million pixels and a 2048-pixel edge. These are automatic scaling targets rather than reasons to reject a large raster. Output rows report the photo dimensions and whether it was reduced.
Text is limited to 200 characters. Size has a minimum to keep marks usable and tiling bounded. Font measurement varies with available browser fonts, so long text can look different across devices. The tool preserves one line; use a short label if the text becomes too shallow or difficult to read after fitting.
Canvas produces a new image rather than retaining the original file structure. The HTML canvas serialization standard, checked 16 November 2026, describes its format and quality behaviour. PNG ignores quality; JPG fills transparent areas white. Re-encoding and scaling can change detail, metadata, colour appearance and byte size.
Common mistakes
- Uploading an opaque logo while expecting its rectangular background to disappear.
- Using one corner placement without checking what is behind it in every photo.
- Assuming Size is the font’s point size rather than relative mark width.
- Expecting the grid to affect placement while tiling is enabled.
- Increasing JPG quality to solve a mark that is too small to read.
- Treating a watermark as a guarantee that the image cannot be copied.
Questions and answers
Can I use a transparent logo?
Yes. A transparent PNG works well, and supported raster alpha is retained while compositing. The final output format separately determines whether untouched photo transparency survives.
What happens when tiling is enabled?
The same mark repeats across the photo with spacing. The single-mark position is ignored, so the position buttons are disabled. Repetition is bounded to avoid excessive drawing for unusually shaped marks.
Why does the logo look smaller than the size percentage suggests?
A tall mark can hit the height cap before reaching its requested width. The tool keeps its aspect ratio and reduces both dimensions. Internal transparent padding in the logo can also make the visible artwork appear smaller.
Can I change text colour or font?
This version uses white text with a black outline in a sans-serif font. For a specific brand style, upload a raster logo containing the designed lettering rather than relying on the text mode.
Can I watermark PDF pages here?
Use PDF page numbers and watermark for PDFs. It adds text overlays without turning the whole PDF into photo images. This tool processes raster photos and supports image logos and tiling.
Free tools for this
PDF & image
Photo Watermark
Watermark a batch of photos with text or a logo in your browser. Choose a position grid, opacity, size and tiling, then download JPG, PNG or WebP copies.
PDF & image
Image Format Converter
Convert batches of images to JPG, PNG or WebP privately in your browser.
PDF & image
Image Resize and Crop
Resize images by pixels or percentage, crop with a movable box and export JPG, PNG or WebP.