Finance

How to Estimate FD Maturity, Yield and Before-Tax Interest

Check fixed-deposit maturity with worked examples, compounding and month-based tenure, plus verified deposit-insurance and Form 121 context for 2026.

By the Criza Labs team · Updated · 6 min read

Key takeaways

  • Enter the offered annual rate and actual compounding frequency; the calculator does not fetch bank offers.
  • Maturity is a before-tax mathematical estimate, with interest and annual effective yield shown separately.
  • For tax years beginning on or after 1 April 2026, the Income Tax Department specifies Form 121 in place of 15G/15H declarations.

An FD calculator estimates how a deposit grows when interest is retained and compounded at a stated rate over a chosen tenure. Use it to check a cumulative-deposit illustration or compare mathematical assumptions before asking the bank to confirm its actual payout, rounding and tax treatment.

Before you start

Collect the deposit amount, the annual rate offered for that tenure and the stated compounding frequency. A quoted annual rate and an effective annual yield are different numbers when interest compounds more than once a year. Do not replace the offered rate with a yield figure and then compound it again.

Decide whether you are checking a cumulative balance or a product that pays interest out along the way. This calculator reinvests interest in its maturity formula; it does not produce a monthly payout schedule. For ₹1.5 lakh, enter 150000, and keep the bank’s product terms beside your calculation rather than inferring them from the default settings.

Inputs stay in your browser; CrizaTools does not upload them. No PAN, account number, nominee detail or deposit certificate is needed. The calculator is an estimate aid rather than a bank instruction, and nothing you type opens an FD, submits a tax declaration or checks deposit-insurance eligibility.

Step by step with CrizaTools

  1. Open the FD calculator. Enter Deposit amount in rupees, using digits with optional grouping commas.
  2. Enter Interest rate (yearly) as the nominal annual percentage you intend to model. The initial rate is an example, not a live offer or an indication of what your bank will pay.
  3. Enter Tenure and choose Years or Months. Changing the unit does not automatically translate your typed number: 18 years and 18 months are very different inputs.
  4. Set Interest compounded to Yearly, Half-yearly, Quarterly (most Indian banks) or Monthly, matching the terms you have verified. The option’s descriptive wording is not a substitute for your bank’s terms.
  5. Read Maturity amount, Deposit, Interest earned, Effective yearly yield and Maturity value. Results update automatically; maturity and earned interest are displayed rounded to whole rupees.
  6. Record the inputs alongside the result. There is no application, payout election or TDS calculation here, so obtain the bank’s final illustration before treating a modelled amount as the exact amount receivable.

Two worked examples

Example 1: ₹1,50,000 for two years at an assumed 6%. Enter Deposit amount 150000, Interest rate 6, Tenure 2, Years and Quarterly. The formula is:

A = P × (1 + r / (100 × n))^(n × t)
  = 150000 × (1 + 6/400)^8
  ≈ 168973.887989

Here P is the deposit, r the annual percentage, n the compounding periods per year, and t the tenure in years. The display shows Maturity amount ₹1,68,974, Interest earned ₹18,974, and Deposit ₹1,50,000. The underlying interest is approximately ₹18,973.887989 before display rounding.

Effective yearly yield is ((1 + 0.06/4)^4 − 1) × 100 ≈ 6.136355%, displayed as 6.14%. That yield exceeds the entered nominal 6% because of the model’s quarterly compounding; it is not an additional rate to enter or a separate payout.

Example 2: ₹80,000 for 18 months at an assumed 7.2%. Enter 80000, rate 7.2, Tenure 18, Months and Monthly. The calculator converts tenure to 18/12 = 1.5 years, giving 18 monthly compounding periods.

A = 80000 × (1 + 7.2/1200)^18
  ≈ 89095.063141
Interest = A − 80000 ≈ 9095.063141

The exact displayed results are Maturity amount ₹89,095, Interest earned ₹9,095, Deposit ₹80,000, and Effective yearly yield 7.44%. The yield is annualised from the monthly frequency, not a claim that the 18-month gain equals 7.44% of the original amount. These rates are illustrative assumptions, not current bank offers.

Limits and what to watch for

The deposit must be positive, annual rate can range from 0% to 30%, and tenure must be positive and no longer than 40 years or 480 months. The interface’s broad boundaries do not describe available bank products. Fractional tenure follows the formula rather than an actual opening date, maturity date or bank-specific day-count convention.

The estimate applies no tax deduction, early-withdrawal adjustment, changing rate or payout schedule. The component’s existing note still names Form 15G/15H. For a tax year beginning on or after 1 April 2026, the Income Tax Department instead specifies Form 121 for the corresponding declaration. Do not rely on that older interface wording for the current form. Income Tax Department forms FAQ, checked 16 November 2026.

The Department’s Form 121 manual describes a declaration of nil estimated tax liability that permits non-deduction of TDS on specified payments where applicable. It is not an automatic exemption created by a calculator result; check eligibility and the correct tax year separately. Form 121 manual, checked 16 November 2026.

Insurance is also a separate question. RBI’s deposit-insurance FAQ states that DICGC cover is up to ₹5 lakh per depositor per bank in the same right and capacity, including principal and interest; relevant deposits across branches of that bank are aggregated. It is not ₹5 lakh for every separately opened FD. RBI deposit-insurance FAQ, checked 16 November 2026.

Common mistakes

  • Entering a yield as the nominal rate: use the offered rate and select its compounding frequency separately.
  • Leaving Years selected for a month-based tenure: confirm the unit after typing the duration.
  • Expecting a monthly-payout schedule: this maturity model retains interest rather than paying it out.
  • Treating rounded maturity as an after-tax promise: obtain the bank’s final calculation and applicable tax information.
  • Following the old form name in the interface: check Form 121 for the relevant post-April-2026 tax year.
  • Assuming each FD gets a separate insurance ceiling: review the RBI’s bank-level aggregation rule.

Questions and answers

How is fixed-deposit maturity calculated?

This tool applies P × (1 + r/(100 × n))^(n × t) using the entered rate, tenure and compounding frequency. It then displays maturity and interest rounded to whole rupees, without calculating a bank’s tax deductions or specific day-count adjustments.

Why is effective yearly yield higher than the entered rate?

With positive rates and more than one compounding period per year, the model earns interest on earlier credited interest. Effective yearly yield expresses that one-year compounded growth, while the input remains the nominal annual percentage.

Is Form 15G or 15H still the right declaration for 2026?

For tax years beginning on or after 1 April 2026, the Income Tax Department specifies Form 121 for this declaration. Check the relevant year and eligibility in its forms FAQ, checked 16 November 2026.

Is every FD separately insured for ₹5 lakh?

No, RBI describes cover per depositor per bank in the same right and capacity, with relevant deposits aggregated and principal plus interest included. See its deposit-insurance FAQ, checked 16 November 2026.

Why does my bank show a different maturity amount?

Your selected rate, compounding frequency, tenure or product type may differ from the bank’s actual terms. Compare those inputs and ask the bank about its dates, rounding and adjustments rather than changing numbers merely to force a match.

Sources

Check the illustration with the FD calculator, or compare another compounding schedule with the compound interest calculator.

Free tools for this

Calculators

FD Calculator

Estimate fixed deposit maturity and interest with quarterly, monthly or yearly compounding.

Calculators

Compound Interest Calculator

Calculate compound or simple interest with yearly, quarterly or monthly compounding and optional monthly additions.

Calculators

SIP Calculator

Estimate the future value of a monthly SIP or a lump sum investment, with an optional yearly step-up.

More guides

Free desktop app from Criza Labs

Bill every day? Get CrizaVoise free

GST invoices, thermal receipts, stock and payments in one offline app for Windows, Linux and macOS. No subscription, no sign-up, no ads, and your data stays on your computer.

  • 58 mm and 80 mm thermal printing
  • UPI QR on every invoice, WhatsApp sharing
  • Open source (Apache 2.0), English, Hindi, Gujarati and more
The CrizaVoise dashboard with quick bill and new invoice buttons, stock alerts and sample figures